For baking workshops and small food factories that want to produce槽子糕、纸杯蛋糕和黑米糕 in a stable manner, a compact and easy-to-use desktop cake mixer is an ideal choice. Nanjing Bai GongBG600DDesktop cake filler, designed for use inPLCTouch control, adaptable to various scenarios.600*400mmStandard baking sheets.32LLarge-capacity hoppers.220VIt can be used with standard household electricity supply, eliminating the need for complex modifications to the workshop. It’s ideal for small to medium-sized baking stores and processing facilities that require batch production of cakes.
Many customers who have just purchased this desktop cake pouring machine encounter various problems. For example, the amount of batter poured may vary unpredictably, the nozzle may become clogged due to tangled batter, and the positioning during pouring may not be accurate. These issues are mostly caused by improper preparation before starting the machine, incorrect parameter settings, or improper operation procedures. This article aims to address these problems.BG600DThis desktop version provides detailed instructions on how to use the product properly, including parameters adjustment, troubleshooting methods, and maintenance tips. Even beginners can easily get started with it.
1. Preparations before turning on the device
Pre-checking before turning on the machine and proper preprocessing of raw materials can directly reduce errors.80%Production failures must be handled in the correct order.
1.Overall inspection of the machine
turned on220VPower supply: Check that the power cord and touch screen are functioning properly. Also, inspect the hoppers, discharge nozzles, and pipelines to ensure there is no residue of dry batter remaining. The quick-release clips should be securely locked in place. The work surface is clean and smooth, and the positioning baffle on the baking tray is not loose at all. The net weight of this machine is…55kgWhen placing it, make sure to use a flat and stable operating surface. Avoid any shaking during operation, as this could affect the accuracy of the grouting process.
2.Pre-treatment of batter ingredients
The prepared cake batter must be sieved to remove any clumping of dry powder or lumps in the batter. This helps prevent clogging of the small nozzles used in baking. It’s important to control the viscosity of the batter properly: if the batter is too thin, it may overflow during baking, causing the cake to collapse; if the batter is too thick, it will take longer to pour out, and the batter may not be distributed evenly during baking.
3.Preparing the baking tray and molds
adapted600*400Standard baking sheets are equipped with molds that have been sprayed with food-grade release oil in advance. When changing out different sizes of molds, it’s easy to replace the nozzles. This makes mold replacement quick and convenient, allowing for use with various products such as cakes, small desserts, and filled pastries. When placing the baking sheet, make sure it is placed against the positioning baffle to ensure accurate placement during the baking process.The locations are unified.
2.Standard operating procedures for the BG600D cake pouring machine

This desktop filling machine is controlled via PLC touchscreen. It features multiple filling modes, and its operation is simple. The steps are as follows:
1.Power on self-test: Turn on the power and wait for the touch screen to perform a self-test. Ensure that there are no error messages displayed. Select the filling mode on the screen. This device supports multiple filling modes. You can choose between fixed-point filling and continuous filling based on the product requirements.
2.Set the grouting parameters: on the touch screen, you can adjust the weight of each batch of grout, the grouting speed, and the movement speed of the workbench. The amount of grout can be adjusted as needed. For regular cakes, it is recommended to fill them to about 80% capacity to prevent overflow during baking. After adjusting the parameters, you can save the recipe so that it can be used directly in future productions, without the need for repeated settings.
3.Pour the batter in: Open the lid of the hopper, and add the filtered batter there.32LThe hopper has a built-in mixing mechanism. When the hopper is activated, the mixture is stirred continuously, preventing the batter from settling or separating over time. This ensures that the consistency of the batter remains consistent throughout the process.
4.Place the baking tray in place, then activate the process: Position the tray with the molds on the workbench, and press the activation button. The workbench will move automatically, allowing the nozzle to dispense material precisely into each mold. The entire process is stable and precise, ensuring that the finished products are of uniform size.
5. Shutting down the machine: After a batch of production is completed, it’s necessary to stop the machine. If there is only a short-term pause, there’s no need to empty the hopper. However, if the machine is shut down for an extended period, it’s essential to clean out all the batter in the hopper and pipelines, to prevent the batter from drying up and causing blockages in the nozzle.
III. Reference parameters for adjusting different pastry products
Trough cakes and millet/black rice cakes: Moderate amount of batter used, with a moderate pouring speed. The movement of the workbench is slowed down to ensure that the cake body remains plump and smooth, without any areas where the batter is insufficient.
Cupcakes, large round cakes: Increase the maximum weight per batch of batter, reduce the moving speed, and adapt to use with larger molds.
Mixed pastries and filled products: Replace the fine-hole nozzles, reduce the pouring speed, control the amount of filling used, and avoid overflowing of the filling.

IV. Common Problems and Solutions
1.The amount of grout used can vary from time to time. It’s important to check whether the batter is separating, and continue stirring it accordingly. Also, ensure that the nozzle isn’t blocked in any area. If necessary, disassemble and clean the nozzle, then recalibrate the filling weight displayed on the screen.
2.At the end of the material discharge, there is a tendency for the material to drag behind it. This may be due to an overly thick consistency of the slurry, or improper adjustment of the finishing blowing parameters. You can fine-tune the finishing blowing time on the screen to remove any remaining batter at the nozzle outlet.
3.No surprises here: the batter contains particles and impurities that haven’t been filtered out. The nozzle assembly needs to be disassembled and cleaned, and nozzles with larger apertures should be used instead.
4.Grout placement misalignment: The baking tray is not properly attached to the positioning baffle. The baffle on the workbench is loose. Please stop the machine and reattach the baffle, then adjust the position of the baking tray accordingly.
V. Daily Cleaning and Maintenance (To Extend the Machine’s Life)
The entire device is equipped with304Made of stainless steel, a food-grade material that is easy to clean. However, the batter contains sugar and protein, so it becomes very difficult to clean after it has dried. Regular maintenance requires attention to detail.
1.Cleanup after daily production ends
After the power goes out, disassemble the hopper, nozzles, and discharge pipes. Clean them with warm water to remove any remaining batter. Dry the components thoroughly before reassembling them. Wipe the work surface clean with a damp cloth.
2.regular maintenance
Check the sealing rings and quick-release clips on the pipelines every week to ensure they are not worn out. Also, inspect the sliding rails and apply food-grade lubricants as needed to ensure smooth movement of the workbench. Finally, check the wiring on the touchscreen to prevent moisture from causing damage.
3.long-term storage
Thoroughly clean all components, allow them to dry completely. Turn off power sources, and store the items in a dry, well-ventilated place. Avoid storing them in humid environments to prevent oxidation of the stainless steel surfaces and damage to electrical components due to moisture.
6.BG600DThe advantages of using a desktop cake mixer

1.Compact desktop model, easy to get started: dimensions80*80*60cmSmall in size,220VIt can be used with standard mains electricity. It’s suitable for small stores and workshops, eliminating the need for large-scale production lines.
2.The mold nozzles are interchangeable, allowing for multi-purpose use of the machine. Nozzles and molds can be easily replaced, enabling the production of various products such as cakes with grooves, cupcakes, and filled pastries. It’s very flexible in terms of product customization.
3. PLCTouch-based operation, with formulas that can be saved: Parameters can be adjusted intuitively on the screen. Multiple product formulas can be saved for easy retrieval when switching products. Easy to use even for beginners.
4. 304Stainless steel construction: Complies with food production hygiene standards, resistant to corrosion, easy to clean, and meets all food production requirements.
5.Precise measurement ensures accuracy, resulting in reduced use of raw materials. It eliminates the need for manual scooping and pouring, ensuring stable weight per dish. This improves the quality of the finished products, reduces waste of batter, and saves labor costs.
summary
Nanjing Bai GongBG600DThe desktop cake filling machine is a cost-effective choice for small-scale baking operations. To make the most of this machine, it’s important to follow these key steps: filter the batter in advance, ensure the baking pan is properly positioned, adjust the parameters accordingly, and clean the machine regularly every day.
After proper operation, the equipment produces stable results with fewer failures. It can consistently produce uniform-quality cake and pastry, thereby significantly reducing labor costs. As long as regular maintenance is carried out, this desktop pouring machine can serve baking production lines reliably over a long period of time.


